The QPH031 is able to receive both linear and circular type satellite signals, recommended for those with motorized systems.
Why buy a CP/LP LNBF?
| Input Frequency |
FSS Band (Linear) 11.7 - 12.2 GHz |
| DSS Band (Circular) 12.2 - 12.7 GHz | |
| Output Frequency | FSS 950 -1450 MHz |
| DSS 950 -1450 MHz | |
| Noise Figure | 0.3 dB typical |
| Gain | 60 dB typical |
| Gain Ripple | 26 MHz bandwidth <+/- 0.5 dB |
| FSS <5 db="" typical="" span=""> | |
| DSS <5 db="" typical="" span=""> | |
| LO Frequency | FSS 10.75 GHz |
| DSS 11.25 GHz | |
| LO Phase Noise | 1 KHz -65 dBc/Hz typical |
| 10 KHz -95 dBc/Hz typical | |
| 100 KHz -110 dBc/Hz typical | |
| LO Stability | +/- 1 MHz typical |
| Isolation | FSS Cross Polar Isolation >30 dB |
| DSS Cross Polar Isolation >3 dB | |
| Two Tone 3rd Order Intercept Point | >10 dBm |
| Output Connector | 4x female F-type |
| Impedance 75 Ohm | |
| Return Loss >10dB | |
| Operating Temperature Range | -40 to +70 deg. C |
| Storage Temperature Range | -40 to +70 deg. C |
|
Band Polarization |
|
|
Ports 1 and 3 (FSS Linear) |
Vertical 11.5 - 14vdc |
| Horizontal 15.5 - 19vdc | |
| Ports 2 and 4 (DSS Circular) | Right 11.5 - 14vdc |
| Left 15.5 - 19vdc | |
| Spurious 1000/ 500 MHz | <-65dBm |
| Output Gain Difference (26 MHz bandwidth) | <6dB |
| Mechanical | Off-set Design |
|
F/D 0.65 |
|
| 40 mm Feedhorn Throat Mount |